Guide · Updated November 2026
Which hands-on jobs need a licence or registration?
The trades and technical jobs where the law requires registration or a certificate – gas, refrigerants, farriery, dental and vet nursing, aircraft – and where it does not.
Most hands-on jobs do not need a licence. You can work as a carpenter, plasterer or mechanic without being on an official register, although employers and customers will expect proper training. A handful of jobs are different: the law says you must be registered or certified before you do certain work.
If you are choosing a career, it helps to know which ones these are, because registration usually means a set training route and sometimes an annual fee. This guide covers the jobs on this site as of November 2026. It is general information, not legal advice – check with the regulator for the job you are interested in.
Gas engineers
The Health and Safety Executive says that anyone employed to work on gas appliances in people's homes must be a Gas Safe registered engineer, and must also be competent in that type of gas work. Each engineer's ID card lists, on the back, the appliances they are qualified to work on.
To join the register you first need certificates of competence for each area of gas work you want to do. The usual route is the Nationally Accredited Certification Scheme (ACS).
Refrigeration, air conditioning and heat pump engineers
Refrigeration, air conditioning and heat pump systems can contain fluorinated gases (F gases). The Air Conditioning and Refrigeration Industry Board (ACRIB) explains that under the F Gas and ODS Regulations, anyone carrying out work that falls within the regulations must hold an F Gas certificate, and employers must only use certified staff for it.
The ACRIB SKILLcard is evidence of a worker's refrigerant qualifications; to get one you need a current F Gas certificate and a pass in a health and safety assessment.
Electricians and other building work
Some building work, including electrical installations in homes, heating and hot water systems, replacement windows and doors, and plumbing, must meet building regulations. GOV.UK explains that an installer who joins a competent person scheme can self-certify this kind of work instead of getting building regulations approval for each job.
Joining a scheme is a business decision rather than a licence to work, but many self-employed electricians and installers do it. Gas work is covered by the Gas Safe Register instead.
Farriers
The Farriers Registration Council says that everyone who shoes horses in Great Britain – even their own horses – must be registered under the Farriers (Registration) Act 1975. To qualify for registration in Great Britain you complete an apprenticeship and pass its end-point assessment.
Dental technicians and veterinary nurses
The National Careers Service says dental technicians need to register with the General Dental Council (GDC), the UK-wide regulator of the dental team. The GDC charges a fee to join the register and an annual fee to stay on it.
Veterinary nurses register with the Royal College of Veterinary Surgeons (RCVS). The RCVS sets out two routes to its Register of Veterinary Nurses: a Level 3 Diploma in Veterinary Nursing, full time or as an apprenticeship alongside a job in a vet practice, or a foundation or honours degree. The National Careers Service adds that you will need to pass enhanced background checks.
Aircraft maintenance engineers
To sign off aircraft as fit to fly – issuing a certificate of release to service – you need a UK Part 66 Aircraft Maintenance Licence from the Civil Aviation Authority. You pass exams in set subject modules and log practical experience on operating aircraft. Depending on the licence category, the CAA asks for between one and five years of experience, with less needed if you complete an approved basic training course.
Not a licence, but worth knowing
Some certifications are not required by law to do the job but matter to customers or employers.
- Heat pump and solar installers: householders using the Boiler Upgrade Scheme grant in England and Wales get quotes from MCS certified installers, and the installer applies for the grant on their behalf
- Construction sites: a CSCS card is not a legal requirement, but most principal contractors ask for one
- Locksmiths: the Master Locksmiths Association says you do not need an official qualification to trade, which makes choosing reputable training more important
Questions people ask
Do I need a licence to be a plumber or electrician?
Not for most of the work, but there are exceptions. Gas work on appliances in people's homes must be done by a Gas Safe registered engineer, and work that falls under the F gas rules needs an F Gas certificate. Electricians who want to self-certify work in homes join a competent person scheme.
Can I shoe my own horse without being a registered farrier?
No. The Farriers Registration Council says everyone who shoes horses in Great Britain, including their own, must be registered.
How do I check a gas engineer is registered?
Ask to see their Gas Safe ID card – the back lists the work they are qualified to do – or check with Gas Safe Register.
Does registration cost money?
Often, yes. For example, the General Dental Council charges a registration fee and an annual fee to stay on the register. Check the regulator's website for current fees.
Sources
Checked November 2026. Rules and rates change – always confirm with the official source.
- HSE: gas safety frequently asked questions hse.gov.uk/gas/domestic/faqs.htm
- What is the ACS gas scheme? (LCL Awards) lclawards.co.uk/learner-zone/what-is-the-acs-gas-scheme/
- ACRIB F Gas SKILLcard acrib.org.uk/acrib-skillcard
- Competent person schemes (GOV.UK) gov.uk/guidance/competent-person-scheme-current-schemes-and-how-schemes-are-authorised
- Farriers Registration Council: becoming a farrier farrier-reg.gov.uk/becoming-a-farrier
- National Careers Service: Dental technician nationalcareers.service.gov.uk/job-profiles/dental-technician
- General Dental Council: registration gdc-uk.org/registration
- National Careers Service: Veterinary nurse nationalcareers.service.gov.uk/job-profiles/veterinary-nurse
- RCVS: how do I become a vet nurse? rcvs.org.uk/students-and-careers/i-want-to-be-a-vet-nurse/how-do-i-become-a-vet-nurse
- UK Civil Aviation Authority: apply for a UK Part 66 Aircraft Maintenance Licence caa.co.uk/commercial-industry/aircraft/airworthiness/engineer-licences/uk-part-66/apply-for-a-uk-part-66-aircraft-maintenance-licence/
- gov.uk gov.uk/apply-boiler-upgrade-scheme/how-to-apply
- cscs.uk.com cscs.uk.com/about/
- locksmiths.co.uk locksmiths.co.uk/faq/qualification-to-trade-as-locksmith/
Ready to find the right job to aim for? Match your skills and hobbies to 52 hands-on careers.
Find my career matchMore guides
Apprenticeships explained
How apprenticeships work in England: levels, pay, training time, who can apply and how to find one in a skilled trade.
T Levels explained
What T Levels are, how the industry placement works, which T Levels lead into the trades and how they compare with apprenticeships.
Skills Bootcamps
Free, flexible courses of up to 16 weeks for adults in England, with a guaranteed job interview at the end – including construction and green skills.
College courses and adult learning
College routes into the trades at 16 and as an adult: diplomas, free courses, loans and help with costs in England.